Preferences

eXpress Data Import adds the following preferences.

Note: More preferences are described in “Setting Device Import Preferences“ on page 17.

bgutil_hp_ov_perf_insight_bucket_size

Specifies the bucket size used for HP OV Performance Insight imports. This preference can be set also from the Import Link Baseline Loads from HP OpenView Performance Insight FIles dialog box.

  • Type: string
  • Default Value: “As Is”

bgutil_hp_ov_perf_insight_bucket_type

Specifies the bucket mode used for HP OV Performance Insight imports. This preference can be set also from the Import Link Baseline Loads from HP OpenView Performance Insight FIles dialog box.

  • Type: string
  • Default Value: “Average”

bgutil_hp_ov_perf_insight_file_list

Specifies a list of files to be imported as HP OV Performance Insight files. This preference can be set also from the Import Link Baseline Loads from HP OpenView Performance Insight FIles dialog box.

  • Type: string list
  • Default Value: <empty>

bgutil_hp_ov_perf_insight_from_time

Specifies the start of the time window for filtering HP OV Performance Insight data. This preference can be set also from the Import Link Baseline Loads from HP OpenView Performance Insight FIles dialog box.

  • Type: string
  • Default Value: “ALL VALUES”

bgutil_hp_ov_perf_insight_overwrite

Specifies whether HP OV Performance Insight imports should overwrite existing data. When TRUE, existing data is overwritten. This preference can be set also from the Import Link Baseline Loads from HP OpenView Performance Insight FIles dialog box.

  • Type: boolean
  • Default Value: TRUE

bgutil_hp_ov_perf_insight_to_time

Specifies the end of the time window for filtering HP OV Performance Insight data. This preference can be set also from the Import Link Baseline Loads from HP OpenView Performance Insight FIles dialog box.

  • Type: string
  • Default Value: “ALL VALUES”

bgutil_infovista_bucket_size

Specifies the bucket size used for InfoVista imports. This preference can be set also from the Import Link Baseline Loads from InfoVista Reports dialog box.

  • Type: string
  • Default Value: “As Is”

bgutil_infovista_bucket_type

Specifies the bucket mode used for InfoVista imports. This preference can be set also from the Import Link Baseline Loads from InfoVista Reports dialog box.

  • Type: string
  • Default Value: “Average”

bgutil_infovista_file_list

Specifies a list of files imported as InfoVista files. This preference can be set also from the Import Link Baseline Loads from InfoVista Reports dialog box.

  • Type: string list
  • Default Value: <empty>

bgutil_infovista_from_time

Specifies the start of the time window for filtering InfoVista data. This preference can be set also from the Import Link Baseline Loads from InfoVista Reports dialog box.

  • Type: string
  • Default Value: “ALL VALUES”

bgutil_infovista_overwrite

Specifies whether InfoVista imports should overwrite existing data. When TRUE, existing data is overwritten. This preference can be set also from the Import Link Baseline Loads from InfoVista Reports dialog box.

  • Type: boolean
  • Default Value: TRUE

bgutil_infovista_to_time

Specifies the end of the time window for filtering InfoVista data. This preference can be set also from the Import Link Baseline Loads from InfoVista Reports dialog box.

  • Type: string
  • Default Value: “ALL VALUES”

bgutil_mrtg_bucket_size

Specifies the bucket size to be used for MRTG imports. This preference can be set also from the Import Link Baseline Loads from MRTG Log Files dialog box.

  • Type: string
  • Default Value: “As Is”

bgutil_mrtg_bucket_type

Specifies the bucket mode to be used for MRTG imports. This preference can be set also from the Import Link Baseline Loads from MRTG Log Files dialog box.

  • Type: string
  • Default Value: “Average”

bgutil_mrtg_file_list

Specifies a list of files to be imported as MRTG files. This preference can be set also from the Import Link Baseline Loads from MRTG Log Files dialog box.

  • Type: string list
  • Default Value: <empty>

bgutil_mrtg_from_time

Specifies the start of the time window for filtering MRTG data. This preference can be set also from the Import Link Baseline Loads from MRTG Log Files dialog box.

  • Type: string
  • Default Value: “”

bgutil_mrtg_overwrite

Specifies whether MRTG imports should overwrite existing data. When TRUE, existing data is overwritten. This preference can be set also from the Import Link Baseline Loads from MRTG Log Files dialog box.

  • Type: boolean
  • Default Value: TRUE

bgutil_mrtg_to_time

Specifies the end of the time window for filtering MRTG data. This preference can be set also from the Import Link Baseline Loads from MRTG Log Files dialog box.

  • Type: string
  • Default Value: “”

bgutil_nethealth_file_alias

Specifies whether Networkhealth file imports should import alias files as well as data files. When TRUE, both are imported. This preference can be set also from the Import Link Baseline Loads from eHealth-Network Data Files dialog box.

  • Type: boolean
  • Default Value: TRUE

bgutil_nethealth_file_alias_file

Specifies a Networkhealth alias file to import. This preference can be set also from the Import Link Baseline Loads from eHealth-Network Data Files dialog box.

  • Type: string
  • Default Value: “As Is”

bgutil_nethealth_file_bucket_size

Specifies the bucket size used for Networkhealth imports. This preference can be set also from the Import Link Baseline Loads from eHealth-Network Data Files dialog box.

  • Type: string
  • Default Value: “As Is”

bgutil_nethealth_file_bucket_type

Specifies the bucket mode used for Networkhealth imports. This preference can be set also from the Import Link Baseline Loads from eHealth-Network Data Files dialog box.

  • Type: string
  • Default Value: “Average”

bgutil_nethealth_file_file_list

Specifies a list of files to be imported as Networkhealth files. This preference can be set also from the Import Link Baseline Loads from eHealth-Network Data Files dialog box.

  • Type: string list
  • Default Value: <empty>

bgutil_nethealth_file_from_time

Specifies the start of the time window for filtering Networkhealth data. This preference can be set also from the Import Link Baseline Loads from eHealth-Network Data Files dialog box.

  • Type: string
  • Default Value: “ALL VALUES”

bgutil_nethealth_file_overwrite

Specifies whether Networkhealth imports should overwrite existing data. When TRUE, existing data is overwritten. This preference can be set also from the Import Link Baseline Loads from eHealth-Network Data Files dialog box.

  • Type: boolean
  • Default Value: TRUE

bgutil_nethealth_file_to_time

Specifies the end of the time window for filtering Networkhealth data. This preference can be set also from the Import Link Baseline Loads from eHealth-Network Data Files dialog box.

  • Type: string
  • Default Value: “ALL VALUES”

device_import.create_ebgp_node

Specifies whether external AS EBGP peers can be created after import. When TRUE, creation of peers is enabled.

When changed from the Preferences dialog box, the value of this preference does not change until startup. However, changes made in the Import Device Configurations dialog box are saved to this preference after each import.

  • Type: boolean
  • Default Value: FALSE

device_import.create_edge_lans

Specifies whether Edge LANs can be created during import. When TRUE, creation of Edge LANs is enabled.

When changed from the Preferences dialog box, the value of this preference does not change until startup. However, changes made in the Import Device Configurations dialog box are saved to this preference after each import.

  • Type: boolean
  • Default Value: FALSE

device_import.create_pvc

Specifies whether to create ATM or Frame Relay PVCs based on network data or to create a full mesh between all possible pairs of devices in the network. This attribute can only be changed at startup.

When changed from the Preferences dialog box, the value of this preference does not change until startup. However, changes made in the Import Device Configurations dialog box are saved to this preference after each import.

  • Type: boolean
  • Default Value: TRUE

device_import.logging

Specifies whether skipped lines and the information contained in device descriptions are logged. When TRUE, such logging is enabled.

When changed from the Preferences dialog box, the value of this preference does not change until startup. However, changes made in the Import Device Configurations dialog box are saved to this preference after each import.

  • Type: boolean
  • Default Value: FALSE

network_health.path

Specifies the full path name of the local directory in which NetworkHealth executable files reside. The application looks in this directory when you import from a NetworkHealth database.

  • Type: string list
  • Default Value: “”

本站文档由 北京智网畅联科技有限公司 整理、翻译并提供 · Documentation compiled and provided by Beijing ZNetLink Technology Co., Ltd.

交流群 · QQ Group:OPNET/智网妙算网络仿真交流群(群号 486383494)

原文档 © 2017 Riverbed Technology · 本站为公益翻译,由 AI 辅助完成,请仔细甄别

Original documentation © 2017 Riverbed Technology. Community translation, AI-assisted. Contact: jiazequn@znetlink.com