Frequency-Swept Jammer

The frequency-swept jammer model can be deployed as a fixed, mobile, or satellite node in the Project Editor. This node model is called jam_swept. It provides continuous transmission which varies over a range of frequencies at a specified rate. The pattern of transmissions performed by the jammer are controlled by a processor which executed the process model jam_sweep_proc. The sweep through the frequencies is modeled by sampling the encompassing sweep bandwidth into a specified number of frequency intervals and continuously cycling through these intervals, issuing an equal length transmission at each step.

The following figure shows the internal structure of the single band jammer model.

Figure 129: jam_swept Node Model Diagram

jam_swept node model diagram

In addition to the built-in node object attributes, the attributes that can be controlled for a frequency jammer are:

  • Jamming band base frequency
  • Encompassing jamming sweep bandwidth
  • Jamming transmitter power
  • Time to complete a single sweep
  • Number of frequency intervals (implicitly specifies interval bandwidth)

The following figure, taken from the Project Editor, shows the configurable attributes of the frequency-swept jammer:

Figure 130: Frequency-Swept Jammer Promoted Attributes

Frequency-swept jammer promoted attributes