URBAN Propagation Parameters

The URBAN propagation model has the following parameters.

Table 1: Parameters for URBAN Propagation Model

Parameter Description
Directory for 3D Model and Results Path to the directory used for the urban propagation files listed in Table 4
3D Model File Name Name of the COLLADA (.dae) file defining the simulation environment
Resolution Resolution to use for geometry calculations, in meters
Latitude Lower Left Corner Not used
Longitude Lower Left Corner Not used
Base Elevation Not used
Left Padding Additional space added to the left (-X) side of the model, in meters
Right Padding Additional space added to the right (+X) side of the model, in meters
Bottom Padding Additional space added to the bottom (-Y) side of the model, in meters
Top Padding Additional space added to the top (+Y) side of the model, in meters
Below Padding Additional space added below (-Z side) the model, in meters
Above Padding Additional space added above (+Z side) the model, in meters

For details on how to create and edit parameter sets, see “Editing Propagation Model Parameters“ on page 20.

Resolution

The resolution affects the TIFF image and sets the number of voxels for which path loss will be calculated. Smaller resolutions give more precise results, but increase the size of the power database (.pdb) file and the time required for path loss calculations. Because the power database file is held in memory during the simulation, the minimum usable resolution is determined by the physical dimensions of the 3-D model and the amount of RAM in your computer.

Padding

The padding parameters specify extra space that is added to the 3-D model before the voxels are defined. You might need this space if your network model requires a node to move outside the boundaries of the 3-D model (for example, to simulate moving from the outside of a building to the interior).

Note: Padding increases the number of voxels, which will increase memory requirements and calculation time. For efficiency, keep padding to a minimum.

本站文档由 北京智网畅联科技有限公司 整理、翻译并提供 · Documentation compiled and provided by Beijing ZNetLink Technology Co., Ltd.

交流群 · QQ Group:OPNET/智网妙算网络仿真交流群(群号 486383494)

原文档 © 2017 Riverbed Technology · 本站为公益翻译,由 AI 辅助完成,请仔细甄别

Original documentation © 2017 Riverbed Technology. Community translation, AI-assisted. Contact: jiazequn@znetlink.com