How Does the Urban Propagation Module Work?
The Urban Propagation Module calculates propagation by dividing the simulation environment into a 3-D array of volumetric pixels (voxels). Each voxel is a cube with a size determined by the user-specified resolution and an effect on radio signals determined by the structural materials within the cube. The information used to build the 3-D voxel array comes from a 3-D model (in Collada format) of the structures within the simulation environment.
UPM uses the 3-D model to generate several files:
- A geometry database, which defines the extent of the simulation environment and the voxels within it
- A material database, which contains a list of the materials used in the 3-D model and their electromagnetic properties
- A 2-D image of the simulation environment that can be added to the network model
- A power database, which contains the path loss from the voxel containing the transmitter to every voxel in the simulation environment.
Because the calculations needed to generate these files (particularly the power database) can be lengthy, the files are saved and reused for any simulation having the same geometry (region and resolution) and transmitter location (specific voxel). When the simulation needs path loss to a receiver at some location, it looks up the precalculated value, making subsequent simulations very fast.
UPM makes these assumptions:
- Maximum path loss is -140 dB (that is, receiver sensitivity is assumed to be 140 dB below transmitter power).
- Material effects on RF propagation are calculated at 900 MHz.
- A flat earth model is used because UPM is intended for indoor or small urban areas and curvature is insignificant over these distances.