Configuring Link Aggregation on Routers

When a physical interface is bundled to an aggregate interface, the model assumes that the interface is running LACP. For routers, you do not need to explicitly enable LACP.

Procedure 75: Configuring Link Aggregation on Switches

  1. Define and configure aggregated interfaces. The routers in the network can be configured with one or more aggregated interfaces, which are used by LACP when bundling links. The aggregated interfaces are defined and configured in the IP > IP Routing Parameters > Aggregate Interfaces attribute on the router. A group must be defined in this attribute to be available to the individual interfaces. In addition to the Aggregation Parameters, aggregate interfaces also include all of the attributes available to other types of interfaces.
  2. Set up member interfaces. The interfaces connected to links that are to be bundled need to be configured to belong to the same aggregate interface. The IP > IP Routing Parameters > Interface Information > Aggregation Parameters > Aggregate Interface attribute lets you specify an aggregate interface name configured in the previous step. The aggregate interface specifications on either side of the link do not need to match, the model forms aggregated links from the smallest common groupings.

End of Procedure 75