Discrete Event Simulation Reports

The following reports can be generated when running a discrete event simulation. To enable these reports, do the following:

  1. Enable the H.323 reporting capabilities. This functionality is enabled by a global simulation attribute when configuring DES (use the H323 Call Reports attribute under Global attributes in the Configure/Run DES dialog box).

    Figure 147: Enabling H.323 Reporting Capabilities

    Enabling H.323 reporting capabilities

  2. Specify the times at which H.323 reporting should occur for voice calls. This is specified in the H323 Reporting Start Time (seconds) or H323 Reporting End Time (seconds) attributes. Any calls that begin after the reporting start time but before the reporting end time will be reported. If you want to configure the reporting times on a per-node basis, configure the H323 > Reporting Start Time and H323 > Reporting End Time attributes on the H.323 terminal or gateway devices. By default, the H.323 devices use the global simulation setting, but the node attributes let you single out the individual devices for which you want to collect reports. Note that this can result in increased simulation run times in large networks due to the extra report processing.

  3. After the simulation, open the Results Browser to view the H.323 reports (they will be on the DES Tables tab).

    Figure 148: Viewing H.323 Reports in the Results Browser

    Viewing H.323 reports in the Results Browser

The following reports are available:

  • The Call Summary Report lets you see overall H.323 network information (calls in the network, average network setup time, average call duration, etc.).
  • The Detailed Call Records Report lets you see information specific to certain calls (call source, call destination, setup time, completion status, start time, duration, etc.).
  • The Detailed Call Routes Report lets you view the signaling routes associated with the call (for H.225 Call Signaling and H.225 RAS Signaling) and which H.323 devices were relevant to the signaling of the call.