Model Features

The H.323 model suite supports the following H.323 features.

Table 57: H.323 Model Features

Feature Description Support
H.323 Device
Terminals Terminals provide both Application and IER support. Supported
Gatekeeper Based on Cisco IOS Gatekeeper. Supported
Border Elements (BEs) Border Elements will only provide basic RAS signaling and will not include the H.225 Annex G signaling. Supported
Gateways H.323 gateway design will incorporate the use of the SHOUTip device. Supported
Multipoint Control Units (MCUs) Allows for teleconference support. Not Supported
H.323 Umbrella Protocols
H.225 Call Signaling Supported
H.225 Registration, Admission, and Status (RAS) Supported
H.225 Annex G H.225 RAS signaling will be used instead. Not Supported
H.245 Signaling Not Supported
Real-time Transport Protocol (RTP) Use of Riverbed standard RTP models Supported
Real-time Transport Control Protocol (RTCP) RTCP is not supported in the Riverbed standard suite of models. Not Supported
Node Parameters
Assigned Gatekeeper Represents the IP address/hierarchical name of the assigned gatekeeper for the particular terminal or gateway. This attribute will only be placed on terminals and gateways. Supported
Gatekeeper Address Represents the IP address of the gatekeeper. This attribute will only be provided on gatekeeper and border element nodes. Supported
Call Signaling Mode Attribute will be placed on gatekeeper nodes. This attribute will specify whether “Direct Call Signaling” or “Gatekeeper-routed Signaling” will occur for calls setup through this particular gatekeeper. Supported
Assigned Administrative Domain Specifies which administrative domain the H.323 device will be placed inside. This attribute will be placed on all H.323 devices. Supported
Max Number of Calls Only allows the specified number of calls to pass through the particular H.323 terminal or gateway at a time. Supported
Encoder Schemes Provides CODEC information for the device Supported
Frames per Packet Provides CODEC information for the device Supported
Hybrid Mode Allows the user to represent voice packets using hybrid or explicit traffic. Supported
SHOUTip Network Signaling Protocol Attribute placed on gateways. Allows the user to choose which voice signaling protocol should be used to forward a particular call (i.e., H.323 or SIP). Supported
Lower-layer Protocol Configuration Attributes All necessary attributes from the Riverbed standard processes will be promoted for configuration by the user (RTP, UDP, and so on). Supported