Configuring EIGRP in a Network Model

When using EIGRP in your network model, you can use many of the model’s default settings, or you can fully configure all of the EIGRP attributes. To use EIGRP, simply configure the appropriate router interfaces to run EIGRP using one of the following methods.

  • Router configuration import. If you have the eXpress Data Import module, configuring all of the model’s EIGRP attributes is done in one step. Because the import process also sets the values of certain attributes that are not yet implemented, your network model will already be configured to use the model enhancements once they are available. See the eXpress Data Import manual for detailed instructions on how to import your router configuration files.
  • Manually. The simplest way to manually configure router interfaces to use EIGRP is with the Protocols > IP > Routing > Configure Routing Protocols menu operation. This allows you to configure several router interfaces in one step. To configure each interface individually, use the IP > IP Routing Parameters > Interface Information > Routing Protocol(s) attribute. Any customization of EIGRP behavior is configured using local attributes on each router.

Procedure 33: Configure EIGRP in a Network

  1. Enable the EIGRP routing protocol on the interfaces running EIGRP using one of the following methods.

    • Edit the IP > IP Routing Parameters > Interface Information > Routing Protocols attribute
    • Select the Protocols > IP > Routing > Configure Routing Protocols menu operation to configure EIGRP as one of the routing protocols.

End of Procedure 33