Node Model
The following table lists the symbolic constants that identify the wireless node objects supported by EMA.
Table 41: Wireless Node Objects
| Object Type | Symbolic Constant |
|---|---|
| radio transmitter | OBJ_ND_RA_TX |
| radio receiver | OBJ_ND_RA_RX |
| antenna | OBJ_ND_ANTENNA |
| radio transmitter channel | OBJ_ND_RA_TXCH |
| radio receiver channel | OBJ_ND_RA_RXCH |
| antenna location | OBJ_ND_ANT_LOC |
| target location: global coordinates | OBJ_ND_ANT_1_GLOBAL |
| target location: body coordinates | OBJ_ND_ANT_1_BODY |
| secondary target location: global coordinates | OBJ_ND_ANT_2_GLOBAL |
| secondary target location: body coordinates | OBJ_ND_ANT_2_BODY |
Table 42: Radio Receiver Object Attributes
| Name | Type | Default |
|---|---|---|
| name | set-required string | |
| channel | object ID ¹ | |
| modulation | string ² | bpsk |
| noise figure | double | 1.0 |
| ecc threshold | double | 0.0 (err/bit) |
| ragain model | string ³ | dra_ragain |
| power model | string ³ | dra_power |
| bkgnoise model | string ³ | dra_bkgnoise |
| inoise model | string ³ | dra_inoise |
| snr model | string ³ | dra_snr |
| ber model | string ³ | dra_ber |
| error model | string ³ | dra_error |
| ecc model | string ³ | dra_ecc |
| icon name | string ⁴ | ra_rx |
| position | object ID ⁵ | |
| doc file | string | nd_radio_receiver |
Note 1: object ID of radio receiver channel compound value object.
Note 2: name of modulation curve model, without suffix.
Note 3: name of Transceiver Pipeline stage object code file, without suffix.
Note 4: name of icon in an icon database.
Note 5: object ID of position object.
Table 43: Radio Transmitter Object Attributes
| Name | Type | Default |
|---|---|---|
| name | set-required string | |
| channel | object ID ¹ | |
| modulation | string ² | bpsk |
| rxgroup model | string ³ | dra_rxgroup |
| txdel model | string ³ | dra_txdel |
| closure model | string ³ | dra_closure |
| chanmatch model | string ³ | dra_chanmatch |
| tagain model | string ³ | dra_tagain |
| propdel model | string ³ | dra_propdel |
| icon name | string ⁴ | ra_tx |
| position | object ID ⁵ | |
| doc file | string | nd_radio_transmitter |
Note 1: object ID of radio transmitter channel compound value object.
Note 2: name of modulation curve model, without suffix.
Note 3: name of Transceiver Pipeline stage object code file, without suffix.
Note 4: name of icon in an icon database.
Note 5: object ID of position object.
Table 44: Radio Receiver Channel Object Attributes
| Name | Type | Default |
|---|---|---|
| data rate | double | 1024.0 (bps) |
| bandwidth | double | 10.0 (kHz) |
| min frequency | double | 30.0 (MHz) |
| spreading code | toggle double | EMAC_DISABLED |
| processing gain | toggle double ¹ | EMAC_DISABLED |
| packet formats | textlist ² | OPC_NT_LINK_ALLPKS |
| signal lock | toggle | EMAC_DISABLED |
Note 1: in units of dB.
Note 2: textlist containing names of packet formats this object can transmit.
Table 45: Radio Transmitter Channel Object Attributes
| Name | Type | Default |
|---|---|---|
| data rate | double | 1024.0 (bps) |
| bandwidth | double | 10.0 (kHz) |
| min frequency | double | 30.0 (MHz) |
| spreading code | toggle double | EMAC_DISABLED |
| packet formats | textlist ¹ | OPC_NT_LINK_ALLPKS |
| power | double | 100.0 (W) |
Note 1: textlist containing names of packet formats this object can transmit.
Table 46: Antenna Object Attributes
| Name | Type | Default |
|---|---|---|
| name | set-required string | |
| pattern | string ¹ | isotropic |
| boresight polar | double | 180.0 (deg) |
| boresight azimuth | double | 0.0 (deg) |
| antenna location | object ID ² | |
| target location coordinate type | string | global |
| target location: global coordinates | object ID ³ | |
| target location: body coordinates | object ID ⁴ | |
| secondary target location coordinate type | string | global |
| secondary target location: global coordinates | object ID ⁵ | |
| secondary target location: body coordinates | object ID ⁶ | |
| icon name | string ⁷ | antenna |
| doc file | string | nd_antenna |
Note 1: name of antenna pattern model, without suffix.
Note 2: object ID of antenna location object.
Note 3: object ID of target location: global coordinates object.
Note 4: object ID of target location: body coordinates object.
Note 5: object ID of secondary target location: global coordinates object.
Note 6: object ID of secondary target location: body coordinates object.
Note 7: name of icon in an icon database.
Table 47: Antenna Location Object Attributes
| Name | Type | Default |
|---|---|---|
| x | double | 0.0 (m) |
| y | double | 0.0 (m) |
| z | double | 1.5 (m) |
Table 48: Target Location: Global Coordinates Object Attributes
| Name | Type | Default |
|---|---|---|
| latitude | double | 0.0 (deg) |
| longitude | double | 0.0 (deg) |
| altitude | double | 0.0 (m) |
Table 49: Target Location: Body Coordinates Object Attributes
| Name | Type | Default |
|---|---|---|
| x | double | 4.0 (m) |
| y | double | 0.0 (m) |
| z | double | 1.5 (m) |
Table 50: Secondary Target Location: Global Coordinates Object Attributes
| Name | Type | Default |
|---|---|---|
| latitude | double | 0.0 (deg) |
| longitude | double | 0.0 (deg) |
| altitude | double | 0.0 (m) |
Table 51: Secondary Target Location: Body Coordinates Object Attributes
| Name | Type | Default |
|---|---|---|
| x | double | 2.0 (m) |
| y | double | 2.0 (m) |
| z | double | 1.5 (m) |