<Scan> Data

The <Scan> tag must have a time associated with it.

Table 16: Scan Data Descriptions

Attribute Req Description
Time yes An integer value representing time. This may be UNIX time or a relative time.
Units no Valid values are sec, msec, and μsec. The default unit is seconds (sec).

In addition, <Scan> tags have a number of elements that describe the state of the server at collection time. There are three categories of elements, as follows:

  • global elements—summarize the overall state of the server
  • dynamic disk elements – summarize the disk utiliizations
  • process elements—summarize the state of individual processes

Table 17: Global and Process Element Descriptions

Element Req Description
Globals no Summary information about the state of the server since the last time scan. On servers with multiple CPUs, there can be an entry for each CPU on the system or one entry for all the CPUs.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan. Individual elements within the Global element may override this setting.
Process no Summary information about the state of individual disks since the last scan time. Entries are only required for disks that are active in the scan period. In cases where accumulation is “yes”, there should be an entry for all disks.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan. Individual elements within the Global element may override this setting.
Process no Summary information about the state of individual processes since the last scan time. There should be an entry for each process on the system.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan. Individual elements within the Global element may override this setting.

<Globals>

Table 18: Global Element Descriptions

Element Req Description
CPUTime yes The total amount of CPU time used by all process in the system since the last scan. This is a double precision floating point value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
units sec – seconds
msec – milliseconds
μsec - microseconds
CPU no In a multiple CPU system, this specifies the CPU to which this <Globals> element applies. If multiple <Global> elements exist in a single <Scan> element, then this element is required. This is an integer value.
GlobalReads no The number of physical reads made to the local disk storage devices. This is a double precision floating point value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
GlobalWrites no The number of physical writes made to the local storage devices. This is a double precision floating point value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
GlobalIOBytes no The total size of all I/O operations in this scan interval. This is a double precision floating point value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
units gb – gigabytes
mb – megabytes
kb – kilobytes
b – bytes
GlobalIOSize no The average size of all I/O operations in this scan interval. This is a double precision floating point value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
units gb – gigabytes
mb – megabytes
kb – kilobytes
b – bytes
GlobalIORate no The rate of data transfer for all I/O operations in this scan interval. This is a double precision floating point value.
Attribute Description
units gb – gigabytes per second
mb – megabytes per second
kb – kilobytes per second
b – bytes per second
GlobalReadbytes no The total size of all block reads in this scan interval. This is a double precision floating point value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
units gb – gigabytes
mb – megabytes
kb – kilobytes
b – bytes
GlobalReadSize no The average size of block reads in this scan interval. This is a double precision floating point value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
units gb – gigabytes
mb – megabytes
kb – kilobytes
b – bytes
GlobalReadRate no The rate of data transfer for all block reads in this scan interval. This is a double precision floating point value.
Attribute Description
units gb – gigabytes per second
mb – megabytes per second
kb – kilobytes per second
b – bytes per second
GlobalWriteBytes no The total size of all block writes in this scan interval. This is a double precision floating point value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
units gb – gigabytes
mb – megabytes
kb – kilobytes
b - bytes
GlobalWriteSize no The average size of block writes in this scan interval. This is a double precision floating point value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
units gb – gigabytes
mb – megabytes
kb – kilobytes
b - bytes
GlobalWriteRate no The rate of data transfer for all block writes in this scan interval. This is a double precision floating point value.
Attribute Description
units gb – gigabytes per second
mb – megabytes per second
kb – kilobytes per second
b – bytes per second
GlobalMinorFaults no The number of minor faults (faults not requiring an I/O) which occurred in this scan interval. This is an integer value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
GlobalMajorFaults The number of major faults (faults requiring an I/O) which occurred in this interval. This is an integer value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
PagesIn no The number of pages swapped in to memory during this scan interval. This is an integer value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
PageInBytes no The total size of all pages swapped in to memory during this scan interval. This is a double precision floating point value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
units gb – gigabytes
mb – megabytes
kb – kilobytes
b - bytes
PageInRate no The rate of data transfer for all pages swapped in to memory during this scan interval. This is a double precision floating point value.
Attribute Description
units gb – gigabytes per second
mb – megabytes per second
kb – kilobytes per second
b – bytes per second
PagesOut no The number of pages swapped out from memory during this scan interval. This is an integer value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
PageOutBytes no The total size of all pages swapped out from memory during this scan interval. This is a double precision floating point value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
units gb – gigabytes
mb – megabytes
kb – kilobytes
b - bytes
PageOutRate no The rate of data transfer for all pages swapped out from memory during this scan interval. This is a double precision floating point value.
Attribute Description
units gb – gigabytes per second
mb – megabytes per second
kb – kilobytes per second
b – bytes per second
PageReqs no The number of all paging operations during this scan interval. This is an integer value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
GlobalSize no The amount of memory used by all processes in the system. This includes the resident memory and the memory in swap. This is a double precision floating point value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
units gb – gigabytes
mb – megabytes
kb – kilobytes
b - bytes
GlobalRSS no The amount of physical memory used by all processes in the system. This is a double precision floating point value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
units gb – gigabytes
mb – megabytes
kb – kilobytes
b - bytes

<DynamicDisk>

Table 19: DynamicDisk Descriptions

Element Req Description
DynamicDiskName yes The name used by the operating system to refer to the physical disk. This is a string value.
DynamicDiskResponseTime no The total amount of CPU time used by all process in the system since the last scan. This is a double precision floating point value.
Attribute Description
units sec – seconds
msec – milliseconds
usec - microseconds
DynamicDiskTransfers no The total number of I/O operations performed on this disk since the last scan. This is an integer value.
DynamicDiskReads no The total number of read operations performed on this disk since the last scan. This is an integer value.
DynamicDiskWrites no The total number of write operations performed on this disk since the last scan. This is an integer value.
DynamicDiskReadBytes no The total number of bytes read from this disk since the last scan. This is an integer value.
DynamicDiskWriteBytes no The total number of bytes written to this disk since the last scan. This is an integer value.

<Process>

Table 20: Process Element Descriptions

Element Req Description
ProcessID yes An identifier unique to the process. This is a string value.
ProcessSize yes The amount of memory used by the process during the scan interval. This includes physical memory and swap memory. This is a double precision floating point value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
units gb – gigabytes
mb – megabytes
kb – kilobytes
b - bytes
ProcessName yes The name given to the process. This need not be unique. This is a string value.
ProcessCPU yes The amount of CPU time used by this process since the last scan. This is a double precision floating point value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
units sec – seconds
msec – milliseconds
usec - microseconds
mb – megabytes
kb – kilobytes
b - bytes
MinorFaults no The number of minor faults (faults not requiring an I/O operation) that occurred since the last scan. This is an integer value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
MajorFaults no The number of major faults (faults requiring an I/O operation) that occurred since the last scan. This is an ineteger value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
InputBlocks no The number of physical read operations during the scan interval. This is an integer value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
OutputBlocks no The number of physical write operations during the scan interval. This is an integer value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
ProcessThread no The thread identifier for this thread. When this element is used, there may be multiple <Process> elements for the same process, as long as each element has a different value for <ProcessThread>. This is a string value.
ProcessParent no The process identifier for the parent process of this process. This is a string value.
ProcessGroup no The identifier of the process group. This is a string value.
ProcessUser no The identifier of the user executing the process. This is a string value.
ProcessApplication no The identifier of the process application. This is used by data collectors that aggregate multiple processes into a single application. This is a string value.
ProcessTask no The identifier of the process task associated with the process. This assignment is normally used by the operating system to group related processes. This is a string value.
ProcessRSS no The amount of physical memory used by the process since the last scan. This is a double precision floating point value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
units gb – gigabytes
mb – megabytes
kb – kilobytes
b – bytes
ProcessArgs no The arguments passed to the process on startup. This is a string value.
ProcessPriority no The priority of the process during the scan interval. This is an integer value.
Swaps no The number of times the process was swapped out during the last scan interval. This is an integer value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
InputBytes no The total number of bytes read through all block input operations. This will be the same as InputBlocks * average block size. This is a double precision value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
gb – gigabytes
mb – megabytes
kb – kilobytes
b – bytes
OutputBytes no The total number of bytes written through all block output operations. This will be the same as OutputBlocks * average block size. This is a double precision value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
gb – gigabytes
mb – megabytes
kb – kilobytes
b – bytes
IOBytes no The total number of bytes written through all block output operations. This will be the same as IOBlocks * average block size. This is a double precision value.
Attribute Description
accumulate “yes” if this scan includes all data, not just since the last scan. In this case Server Characterization Editor will calculate a difference based on the value collected for the previous scan.
units gb – gigabytes
mb – megabytes
kb – kilobytes
b – bytes
ProcessStart no The start time of a process.
Attribute Description
time An integer value representing time. This may be UNIX time or a relative time.
units sec – seconds
msec – milliseconds
usec - microseconds

本站文档由 北京智网畅联科技有限公司 整理、翻译并提供 · Documentation compiled and provided by Beijing ZNetLink Technology Co., Ltd.

交流群 · QQ Group:OPNET/智网妙算网络仿真交流群(群号 486383494)

原文档 © 2017 Riverbed Technology · 本站为公益翻译,由 AI 辅助完成,请仔细甄别

Original documentation © 2017 Riverbed Technology. Community translation, AI-assisted. Contact: jiazequn@znetlink.com