Configuring TDMA Parameters
Parameters for the TDMA protocol are configured in the TDMA configuration object and on individual TDMA devices in the network.
- The configuration object lets you configure parameters that are reused across the network, such as the definitions of the TDMA networks in the scenario.
- The TDMA attributes on devices in the network apply only to the TDMA interface or interfaces on that device. When a device has more than one TDMA interface, there is a separate set of TDMA attributes for each interface. TDMA attributes are grouped under TDMA in the Attributes dialog box and let you configure parameters such as the TDMA network that the interface belongs to, the TDMA MAC address, and power settings.
To configure TDMA in a network, using the default settings for the TDMA model, follow these steps:
- Configure global TDMA profiles. TDMA profiles are defined in the TDMA Profiles attribute of the TDMA configuration object. Profiles let you configure the TDMA frames, data slots, and control slots in a TDMA network. After you have defined a TDMA profile, you can apply it to one or more TDMA networks. If a TDMA network needs different settings from those already defined in a profile, create a new profile. You can create as many profiles as you need to configure the TDMA networks in a scenario.
- Define TDMA networks. TDMA networks are defined in the Network Definitions attribute of the TDMA configuration object. The TDMA networks defined here will be available later when you configure a TDMA interface to belong to a particular network.
- Configure TDMA interfaces. TDMA interfaces are configured individually, on each TDMA-enabled device. All TDMA parameters on the device are grouped under the TDMA attribute.