Model Attributes: Frame Relay

The following table lists the attributes of the PVC demand used to specify PVCs.

Table 52: PVC Demand Configuration Attributes

Attribute Group Attribute Description
Trunk Match Information If configured, specifies the conditions a Frame Relay trunk must meet for a VC to route over it.
Route Information • Behavior on Failure
• Defined Routes
This attribute group is used to determine the behavior if all preferred routes for the VC have failed. If this attribute is set to "Use Dynamic Routing", the routing protocol dynamically computes the shortest path to the destination and routes the VC along this path, if all preferred routes fail. If this attribute is set to "Fail Connection", then the connection is dropped, if all preferred routes fail.
Characteristics Specifies the profile to be used that defines the characteristics of this PVC.
Cloud Parameters • Outgoing/Incoming Delay (seconds)
• Outgoing/incoming Packet Discard Ratio
Specifies the cloud parameters for each PVC object. The cloud parameters consist of incoming and outgoing delay of packets through the Frame Relay Cloud object and the incoming and outgoing Packet Discard Ratio of the Frame Relay Cloud object. This delay is for every cloud object encountered.
Contract Parameters • Outgoing/Incoming CIR (bits/sec)
• Outgoing/Incoming Bc (bits)
• Outgoing/Incoming Be (bits)
• QoS Class
Specifies the committed information rate, committed burst size, and excess burst size the network attempts to deliver under normal conditions. By default the incoming Bc and Be are the same value as the outgoing Bc and Be.
Specify the Frame Relay QoS class in this group, as well.
PVC Endpoints Source Node Configuration This compound attribute defines the node name, port, and DLCI from which traffic, if it arrives on this source node, will be forwarded on this PVC.
Destination Node Configuration This compound attribute defines the node name, port, and DLCI to which traffic arriving at the destination node is forwarded.
Traffic Information • Incoming Average Packet Size (bytes)
• Outgoing Average Packet Size (bytes)
• Incoming Traffic
• Outgoing Traffic
Specifies the incoming and outgoing background traffic pattern on the PVC in each direction.