Model Interfaces: Ethernet

Packet Formats: Ethernet

The following table lists the packet formats used in the Ethernet model suite.

Table 47: Ethernet Packet Formats

name description
ethernet Represents the Ethernet packet format. This packet format allows for the encapsulation of higher level protocol data and carries control fields such as destination and source address, and protocol type. In addition, the frame check sequence (FCS) and preamble components of transmissions are modeled as fields of the packet.

ICI Formats: Ethernet

The following table lists the interface control information (ICI) formats used in the Ethernet model suite.

Table 48: Ethernet ICI Formats

name description
eth_mac_ind Used in conjunction with packet transfers from eth_mac_v2 (or ethernet_mac_v2) to the higher layers. The attributes carried in this ICI specify the destination address (normally that of this station), the address of the sending station, and the type of higher level protocol used, respectively.
mac_request Used in conjunction with packet transfers to eth_mac_v2 (or ethernet_mac_v2). It carries the destination address of the node to which the packet is being transmitted. The higher level protocol type may also be passed in this ICI, but it is not currently used by MAC processes.

Ethernet Addressing

Each MAC entity has a physical address, specified by the “station_address” attribute of the eth_mac_v2 (and ethernet_mac_v2) process models. When using these models in conjunction with the Spanning Tree Bridge models, the Ethernet addresses must be unique for the entire network to support correct bridge address learning. The addresses can be automatically assigned to meet this requirement.

本站文档由 北京智网畅联科技有限公司 整理、翻译并提供 · Documentation compiled and provided by Beijing ZNetLink Technology Co., Ltd.

交流群 · QQ Group:OPNET/智网妙算网络仿真交流群(群号 486383494)

原文档 © 2017 Riverbed Technology · 本站为公益翻译,由 AI 辅助完成,请仔细甄别

Original documentation © 2017 Riverbed Technology. Community translation, AI-assisted. Contact: jiazequn@znetlink.com