Model Scope and Limitations: X.25

The X.25 process models fully simulate the operation of the packet layer procedures as specified in sections 3–5 of the X.25 Recommendation (and the corresponding sections of ISO 8208), with the following limitations:

  • Certain optional procedures, such as user facilities (as described in sections 6–7 of the X.25 Recommendation) and alternative DTE procedures for responding to packets out of sequence (as described in section 11.2 of ISO 8208), are not implemented.
  • X.25 processes will never enter a “busy” condition and therefore will never send Ready not Receive (RNR) packets.
  • Retransmission of data packets is not supported; the REJ packet will not be sent or handled. As suggested by the Recommendation, it is the responsibility of the higher layer application to handle packet loss within the network.
  • Only two-way channel numbers are supported; incoming-only and outgoing-only channel numbers are not implemented.
  • Partial and network-originated restart procedures are not supported.
  • Connecting two X.25 DTEs together directly (the “DTE/DTE environment”, including “DCE negotiation”) is not fully supported.