Manage Licenses from the Command Line

Once you have added your licenses to the license server, there are certain operations you may need to perform at a later time. For example:

Deregistering a License from the Command Line

Typically, you will deregister licenses if the computer is about to be reformatted or decommissioned, or if you want to move the license to another license file.

This section describes how to deregister licenses when using the command line (floating license manager). Use Procedure 39 to deregister one or more licenses.

Procedure 39: Deregister Licenses from the Command Line

  1. Open the floating license manager from the command line:

    • For Riverbed analysis software or AppInternals, use Procedure 29.
  2. At the manager> prompt, enter delete_permits and press Enter. See the following example:

    manager> delete_permits
    Please provide the transaction code to Riverbed via the web:
    https://rpmapps.riverbed.com/cms/4dcgi/LICW4D_CL_Operations
    If you are unable to perform license registration over the web,
    contact Riverbed via:
            Phone: 1.888.782.3822 or +1.415.247.7381 
            Email: support@riverbed.com
    Transaction code> DFEB.072B.FF29.41C0.45EE.A9DF.035A.A033.94D4
    After sending the transaction code to Technical Support, please
    do not exit the current session of op_license_util before
    receiving the approval code from Technical Support.
    Enter approval code.
    Approval code>
    
  3. In your web browser, go to: https://rpmapps.riverbed.com/cms/4dcgi/LICW4D_CL_Operations

  4. Log in with your Riverbed support Username and Password.

  5. Select "Deregister License (delete_permits)" and click Next.

    Figure 34: Deregister License—Browser Method

    Deregister License—Browser Method

  6. Enter the Transaction Code (from step 2) and the hostname of your license server. Make sure there are no extra spaces before or after the code or hostname. Click Next.

    Figure 35: Enter Transaction Code/Hostname

    Enter Transaction Code/Hostname

  7. When the "Select Starting License" page appears, select the lowest license ID that you want to add to your computer. If you want to add only one license, select that license.

  8. When the "Select Ending License" page appears, select the highest license ID that you want to add to your computer. If you want to add only one license, select that license. The confirmation page appears.

  9. When the "License Registration Confirmation" page appears, check that the information is correct, then click on the Get Approval Code button.

    Result: The Approval Code appears.

  10. Enter the Approval Code where prompted in the floating license manager and press Enter.

  11. To confirm that the server deregistered the license, use the license manager permit_info command to display the license you have available.

  12. Type exit to leave the floating license manager, and close your browser.

Deregistering versus Clearing a License File

Should you use "Deregister License" or "Clear License File"? These two options sound very similar but each performs the same operation on a different scale.

  • Option 1—Deregister all licenses If you want to deregister all of your licenses in a single operation, use Clear License File (see Clearing a License File from the Command Line). This deregisters all licenses in the license file at once, regardless of their contract number range.
  • Option 2—Deregister one or more selected licenses If you want to deregister a selected license use the Deregister License operation described in this section, and enter the license(s) to remove from your license file.

Clearing a License File from the Command Line

This operation deregisters all licenses from the license file in a single operation. You should always contact Riverbed Technical Support by e-mail, phone, or fax before performing this operation.

In the command line of the floating license manager, use the clear_fl_db command to clear a license file.

Change Maintenance Expiration from Command Line

This section describes how to change the maintenance expiration date for licenses when using the command line (floating license manager).

Procedure 40: Change Licensing Maintenance Expiration Using the Command Line

  1. Open the floating license manager from the command line:

    • For Riverbed analysis software or AppInternals, use Procedure 29
  2. At the manager> prompt, enter ch_mtn and press Enter. See the following example:

    manager> ch_mtn
    Please provide the transaction code to Riverbed via the web:
    https://rpmapps.riverbed.com/cms/4dcgi/LICW4D_CL_Operations
    If you are unable to perform license registration over the web,
    contact Riverbed via:
            Phone: 1.888.782.3822
            Email: support@riverbed.com
    Transaction code> DFEB.072B.FF29.41C0.45EE.A9DF.035A.A033.94D4
    After sending the transaction code to Technical Support, please
    do not exit the current session of op_license_util before
    receiving the approval code from Technical Support.
    Enter approval code.
    Approval code>
    
  3. In your web browser, go to: https://rpmapps.riverbed.com/cms/4dcgi/LICW4D_CL_Operations

  4. Log in with your Riverbed support Username and Password.

  5. Select "Change Maintenance Expiration (ch_mtn)", then click Next.

    Figure 36: Change Maintenance Expiration—Browser Method

    Change Maintenance Expiration—Browser Method

  6. Enter the Transaction Code (from step 2) and the hostname of your license server. Make sure there are no extra spaces before or after the code or hostname. Click Next.

    Figure 37: Enter Transaction Code/Hostname

    Enter Transaction Code/Hostname

  7. When the "Select Starting License" page appears, select the lowest license ID that you want to update. If you want to update only one license, select that license.

  8. When the "Select Ending License" page appears, select the highest license ID that you want to update. If you want to update only one license, select that license.

    Result: The confirmation page appears.

  9. When the "License Registration Confirmation" page appears, check that the information is correct, then click on the Get Approval Code button.

    Result: The Approval Code appears.

  10. Enter the Approval Code where prompted in the floating license manager and press Enter.

  11. Type exit to leave the floating license manager, and close your browser.

Changing the Expiration Date for a License

This section describes how to change the expiration date for licenses when using the command line (floating license manager).

Procedure 41: Change License Expiration Using the Command Line

  1. Open the floating license manager from the command line:

    • For Riverbed analysis software or AppInternals, use Procedure 29
  2. At the manager> prompt, enter ch_exp and press Enter. See the following example:

    manager> ch_exp
    Please provide the transaction code to Riverbed via the web:
    https://rpmapps.riverbed.com/cms/4dcgi/LICW4D_CL_Operations
    If you are unable to perform license registration over the web,
    contact OPNET via:
            Phone: +1.415.247.7381 or +1.888.782.3822
            Email: support@riverbed.com
    Transaction code> DFEB.072B.FF29.41C0.45EE.A9DF.035A.A033.94D4
    After sending the transaction code to Technical Support, please
    do not exit the current session of op_license_util before
    receiving the approval code from Technical Support.
    Enter approval code.
    Approval code>
    
  3. In your web browser, go to: https://rpmapps.riverbed.com/cms/4dcgi/LICW4D_CL_Operations

  4. Log in with your Riverbed support Username and Password.

  5. Select "Change License Expiration (ch_exp)", then click Next.

    Figure 38: Change License Expiration—Browser Method

    Change License Expiration—Browser Method

  6. Enter the Transaction Code (from step 2) and the hostname of your license server. Make sure there are no extra spaces before or after the code or hostname. Click Next.

    Figure 39: Enter Transaction Code/Hostname

    Enter Transaction Code/Hostname

  7. When the "Select Starting License" page appears, select the lowest license ID for which you want to change the expiration date. If you want to update only one license, select that license.

  8. When the "Select Ending License" page appears, select the highest license ID for which you want to change the expiration date. If you want to update only one license, select that license.

    Result: The confirmation page appears.

  9. When the "License Registration Confirmation" page appears, check that the information is correct, then click on the Get Approval Code button.

    Result: The Approval Code appears.

  10. Enter the Approval Code where prompted in the floating license manager and press Enter.

  11. Type exit to leave the floating license manager, and close your browser.

本站文档由 北京智网畅联科技有限公司 整理、翻译并提供 · Documentation compiled and provided by Beijing ZNetLink Technology Co., Ltd.

交流群 · QQ Group:OPNET/智网妙算网络仿真交流群(群号 486383494)

原文档 © 2017 Riverbed Technology · 本站为公益翻译,由 AI 辅助完成,请仔细甄别

Original documentation © 2017 Riverbed Technology. Community translation, AI-assisted. Contact: jiazequn@znetlink.com