Terminology

architecture directory

An architecture-specific system directory within a particular Riverbed Modeler release. Executables and libraries are typically stored in this directory. Architecture directories are subdirectories of the sys directory of a particular release. In this documentation, the symbol <arch> represents an architecture directory. The following table lists the names used for this directory under the various supported architectures.

Table 1: Architecture Directory Names

Vendor CPU Operating System <arch> Directory Name
various x86 or compatible Windows pc_intel_win32
various AMD and Intel x64 processors Windows x64 pc_amd_win64
various x86 or compatible Linux pc_intel_linux
various AMD and Intel x64 processors Linux x64 pc_intel_linux64
various various all Linux systems unix

binary directory

A subdirectory of the installation directory that contains the Riverbed Modeler binaries. The binaries for a specific release and computer architecture are located in <release>/sys/<arch>/bin. Under Linux, a special binary directory contains scripts that allow Riverbed Modeler to locate the binaries for the platform being used.

In this documentation, the symbol <bindir> represents the path to the directory where binary files for Riverbed Modeler are stored. For example, if Riverbed Modeler 18.6.0 is installed in the default location, <bindir> represents these path names:

  • (Windows) C:\Riverbed\18.6\sys\pc_intel_win32\bin
  • (Linux) /usr/riverbed/18.6/sys/pc_intel_linux/bin

CD-ROM directory; CD-ROM drive

The mount point for the CD-ROM drive of the install workstation. The symbol <cd_dir> represents the CD-ROM directory in this manual. (Under Windows, the CD-ROM drive will be mounted at a particular drive letter, rather than a directory. The symbol <cd_drive> represents the drive letter of the CD-ROM drive.)

client workstation

A workstation used to execute Riverbed Modeler programs. Each client workstation must have access to the Riverbed Modeler directory, either on its local disk, on a server disk, or via the Network Filesystem (NFS).

install workstation

A workstation with a compatible CD-ROM drive. This workstation must be able to mount the server workstation disk partition containing the Riverbed Modeler directory via the Network Filesystem. At many sites, the server workstation has a CD-ROM drive and is therefore also the install workstation. At completely stand-alone sites, a single workstation fills all three roles: client, server, and install workstation.

installation directory

The directory where Riverbed Modeler is or will be loaded. You can choose where you want to install the software; almost any location will work. However, because the software occupies a significant amount of disk space, the disk partition holding the installation directory must have enough free space before installation begins (to determine the amount of partition free space required, refer to technical support).

Typical locations for the Riverbed Modeler directory are:

  • Linux: /usr/riverbed or /usr/local/riverbed
  • Windows: C:\Riverbed

The symbol <install_dir> represents the installation directory. Typically, there is only one path name to this directory. Different subdirectories within the installation directory might contain different releases of Riverbed Modeler.

library directory

A directory containing the Riverbed Modeler libraries. The libraries for a specific release and computer architecture are located in <release>/sys/<arch>/lib.

In this manual, the symbol <libdir> represents a library directory. For example, if Riverbed Modeler is installed in the directory /usr/riverbed under Linux, then <libdir> represents the directory path name /usr/riverbed/18.6/sys/pc_intel_linux/lib.

licensing system

The licensing system allows you to run Riverbed Modeler or another licensed application on any workstation on the local network. See "Licensing System Overview" on page 2 for a description of the important components of this system.

release CD-ROM

The distribution media supplied as part of the Riverbed Modeler release materials.

release directory

A subdirectory of the installation directory that contains the software for a particular Riverbed Modeler release. Release directories are subdirectories of the installation directory. In this documentation, the symbol <release> represents the release directory. You can derive the name of the release directory from the product release name. For example, if the name is "Riverbed Modeler 18.6.0", the corresponding release directory is <install_dir>/18.6.

server workstation

The workstation that stores the Riverbed Modeler on its disk. A server workstation may also be a client workstation. More commonly, however, a server workstation is a file server that is shared by a workgroup.