op_tbl_pattern_get()

摘要

根据天线模块 ID 获取天线方向图。

语法

op_tbl_pattern_get (antenna_id)
参数 类型 说明
antenna_id objid 天线模块 ID

返回类型

Pattern_Handle

天线方向图;若未找到该方向图则返回 OPC_NIL。

示例

/* Discover the Antenna module id associated with this cell. */
cell_ant_id  = op_topo_assoc (cell_tx_id, OPC_TOPO_ASSOC_OUT, OPC_OBJTYPE_ANT, 0);

/* Check to make sure that the returned Object ID is valid. */
if (cell_ant_id == OPC_OBJID_INVALID)
	op_sim_end ("There is no antenna module connected to this cell.", "", "", "");

/* Obtain the antenna boresight and reference values. */
op_ima_obj_attr_get (cell_ant_id, "pointing ref. theta",
	&(global_node_b_params[cell].boresight_theta));

op_ima_obj_attr_get (cell_ant_id, "pointing ref. phi",
	&(global_node_b_params[cell].boresight_phi));

global_node_b_params[cell].boresight_phi =
	90 - global_node_b_params[cell].boresight_phi;

op_radio_antenna_point_info_get (cell_ant_id,
	&(global_node_b_params[cell].pointing_ref_phi),
	&(global_node_b_params[cell].pointing_ref_theta));

/* Get a reference to the antenna pattern of this cell. */
global_node_b_params[cell].antenna_model_id =
	(void *) op_tbl_pattern_get (cell_ant_id);

详情

无。

用途

提供一种获取天线模块的天线方向图表引用的方式。该引用随后可用于 op_tbl_pat_gain()。

错误

  • 可恢复错误(Recoverable Error):对象 ID(<antenna_id>)超出范围。
  • 可恢复错误(Recoverable Error):对象 ID(<antenna_id>)指向受限对象。
  • 可恢复错误(Recoverable Error):对象 id(<antenna_id>, <obj_path>)不对应任何天线模块。

参考

本站文档由 北京智网畅联科技有限公司 整理、翻译并提供 · Documentation compiled and provided by Beijing ZNetLink Technology Co., Ltd.

交流群 · QQ Group:OPNET/智网妙算网络仿真交流群(群号 486383494)

原文档 © 2017 Riverbed Technology · 本站为公益翻译,由 AI 辅助完成,请仔细甄别

Original documentation © 2017 Riverbed Technology. Community translation, AI-assisted. Contact: jiazequn@znetlink.com