菜单操作:BGP
Protocols > BGP 菜单提供了一些操作,便于执行配置 AS 号和路由重分发等操作。Protocols > BGP 菜单项列于下表中。
表 30:BGP 菜单操作
| 菜单项 | 说明 |
|---|---|
| Configure Status… | 为所有路由器或选定的路由器启用或禁用 BGP Parameters > Status 属性 |
| Configure Start Time… | 将选定路由器的 BGP 启动时间配置为你指定的值。 |
| Configure Synchronization Status | 为所有地址族启用或禁用 BGP Parameters > Address Family Parameters > Address Family Properties > Synchronization 属性。 |
| Configure IBGP Peers… | 将选定节点配置为内部 BGP 邻居。此操作使用路由器 loopback 接口的 IP 地址。如果尚未设置,将首先自动分配 IP 地址。 |
| Configure Route Redistribution… | 为第一个 VRF 名称设置为 none 的 IPv4 地址族配置 BGP Parameters > Address Family Parameters > Address Family Properties > Redistribution 属性。指定 BGP 必须从中接受路由的协议。 |
| Configure IPv6 Route Redistribution | 为第一个 VRF 名称设置为 none 的 IPv6 地址族配置 BGP Parameters > Address Family Parameters > IPv6(地址族)Redistribution 属性。指定 BGP 必须从中接受路由的协议。 |
| Disable Route Redistribution on Routers… | 将网络中所有或选定的路由器上的 BGP 配置为不接受来自任何其他路由协议的路由。 |
| Disable IPv6 Route Redistribution on Routers... | 将网络中所有或运行 IPv6 的选定路由器上的 BGP 配置为不接受来自任何其他路由协议的路由。 |
| Open Import Log | 打开与导入 BGB RIB-in 信息相关的导入日志。 |
| Open Peering Center | 打开 Peering Center,用于分析网络之外流量的路由。 注: 此特性仅在带有 Carrier Planner 许可证的 SteelCentral NetPlanner 中可用。 更多信息,参见“Using the Peering Center to See Beyond Your Network”。 |
| Model User Guide | 打开本文档。 |